The electronics/battery canisters are mounted in elastic sleeves located on the bottom side of the outerbag in between the counterlungs and the scrubber canister. Carefully route the cables so that they are not pinched or kinked, and then insert the canisters into the elastic sleeves (See Figure 21).
With the canisters installed, connect the HUD and controller to their respective canister cables. The cables are color coded. Align and push the connectors together, then tighten the screw-together strain reliefs. The excess cable can now be tucked into the pouches on the inside of the counterlung outerbags (See Figures 22 & 23).
Â